Resistant to dust and water.
IP67 protection for industrial environments exposed to dust and water, both indoors and outdoors.
An autonomous ground robot built for industrial inspection
Designed to perform frequent, repeatable and multi-sensor inspections inside live industrial environments.
- sensor families
- 6
- Temperature, acoustics, vision, vibration, 3D perception and gas.
- of inspection per charge
- Up to4 h
- For a round across your plant, depending on the planned route.
- range per charge
- 7 km
- Automatically returns to its station to recharge between rounds.
Why a ground-based robot
The same points. Every round.
Across a large site, a one-off inspection cannot track a developing issue. Slogy returns to the same equipment and the same measurement points.
Reach dispersed equipment
A programmed route connects inspection points across your site.
Make patrols repeatable
Measurements are taken at the same locations so they can be compared from one round to the next.
Spot changes over time
The inspection history reveals changes between rounds and supports their analysis.
Reduce human exposure
The robot collects readings in hard-to-access areas. Your teams focus on analysis and intervention.
On board Slogy
A mobile measurement station.
A quadruped base, an onboard computer and modular sensors. The configuration adapts to your equipment and the conditions you need to monitor.
- 1
Thermal imaging
Hotspots, overheating and thermal imbalances.
- 2
Acoustics
Air and gas leaks, partial discharges and abnormal mechanical signatures.
- 3
RGB vision
Corrosion, visible defects and readings from gauges and indicators.
- 4
Vibration
Contactless optical measurement to detect early mechanical faults.
- 5
3D perception
LiDAR localization, mapping and anomaly positioning.
- 6
Gas
CH₄, CO, H₂S, O₂ and VOCs, according to the selected probes and thresholds.
Modules are selected for your site. They can be added or replaced without redesigning the platform.
At home on industrial terrain.
Uneven ground, gravel, ramps and stairs: its quadruped base lets it navigate obstacles and continue inspection rounds close to your equipment.
Two configurations
The right robot for your terrain.
The same inspection principles, with a base suited to your access routes and operating environment.
Facilities & workshops
Facility
Compact, to move through your facilities.
An agile platform for aisles, narrow passages and stairs inside your industrial buildings.
- Movement through confined spaces
- Stair and ramp navigation
- Interchangeable batteries
Outdoor & demanding terrain
Field
Robust, to get closer to the field.
An industrial chassis designed for uneven ground, gravel and exposed surfaces across your sites.
- Movement over uneven surfaces
- Configuration for exposed environments
- Modules selected for the mission
Use cases
Inspection where it matters.
From electrical substations to production equipment, each round addresses a specific monitoring need.
Electrical substations
Inspect transformers, connections and cooling systems. Identify hotspots, partial discharges and changes in instrument readings.
Rotating equipment & utilities
Monitor pumps, motors and bearings. Locate compressed air leaks and correlate thermal, acoustic and vibration signals.
Stockpiles & infrastructure
Scan storage areas, reconstruct volumes and track their evolution. Record geometric changes over successive patrols.
Onboard configuration
Designed for real industrial conditions.
Each configuration is defined with on-site teams, based on your operational priorities.
Scroll the table to view all columns.
| Subsystem | Onboard sensor | Measurement | Use cases |
|---|---|---|---|
| Vision | HD visual camera | High-resolution images and videos | Visual inspection, corrosion, visible defects and general equipment condition. |
| Thermal | Radiometric thermal camera | Absolute temperature and thermal gradients | Hotspots, motor overheating, electrical panels and thermal networks. |
| Acoustics | Directional acoustic camera | Acoustic and ultrasonic signatures | Air and gas leaks, cavitation, degraded bearings and misalignment. |
| Vibration | High-frame-rate camera | Micro-vibrations and dynamic behaviour | Non-contact vibration analysis and early mechanical fault detection. |
| Gas / HSE | Modular gas probes | Gas concentrations: CH₄, CO, H₂S, O₂ and VOCs | HSE monitoring, leak detection and atmospheric control. |
| 3D | LiDAR sensor and IMU | Position, distance and 3D environment | Precise anomaly localization and site mapping. |
| Lighting | Controlled illumination | Visibility in dark areas | Inspection of poorly lit areas, galleries and technical rooms. |
In the field
From site to decision.
Patrols adapted to your facilities, multiple physical signals and observations you can compare over time.
- Autonomous inspection rounds
- Up to3×/ day
- Frequency adapted to the route and charging time.
- Measurements per inspection route
- More than10
- Combined readings along the inspection route.
- Human exposure in hazardous areas
- −80%
- The robot takes readings in hazardous areas.
1
A route that fits the site.
Slogy gets close to equipment, following your access routes and operating conditions.
- Uneven ground, indoors and outdoors.
- Predefined, repeatable inspection points.
- Patrols integrated into site operations.
2
Signals that work together.
Thermal imaging complements the other sensors to locate an anomaly and help understand its origin.
- Hotspots on electrical connections.
- Motor and bearing overheating.
- Losses and imbalances in thermal networks.
3
Findings that guide action.
Observations are located and compared over time to guide maintenance decisions.
- Anomalies linked to their location.
- Changes tracked between patrols.
- Interventions prioritized by your teams.
A patrol with Slogy
From route to reading, autonomously.
Routes and inspection points are defined with your teams. The robot then carries out rounds according to the agreed schedule.
Follow the planned route.
Slogy reaches equipment along a route defined with your teams. Onboard localization allows it to return to the same inspection points on each patrol.
Every round builds knowledge of your site.
The value of inspection grows over time. REX links the robot’s measurements to your equipment and its history.
Connect each reading
Every measurement is timestamped, located and associated with the inspected asset.
Compare patrols
Readings are stored over time to track changes and detect developing issues.
Prepare action
Findings feed into reports and alerts, with integration into your CMMS defined for the project.
Deployment & operations
Answers to common deployment questions
Let’s prepare your first patrol.
Equipment, access routes and inspection frequency: let’s discuss your site constraints and the measurements your teams need.
Let’s discuss your siteA conversation to define the right route and configuration.
Yes. Slogy is engineered specifically for uneven industrial terrain. It features dynamic balancing for irregular surfaces (gravel, wet concrete) and can autonomously navigate stairs and obstacles. The system delivers up to 4 hours of continuous inspection per charge with a range of 7km, regardless of ground complexity.
The robot possesses onboard edge computing capabilities to buffer all high-fidelity telemetry locally. In signal-denied zones (dead spots), it continues its mission autonomously and synchronizes data with the REX platform the moment connectivity is restored. Data can also be retrieved via physical secure link if needed.
Using 360° LiDAR scanning, the robot constantly maps its surroundings for dynamic collision avoidance. If a human operator is detected in its path, the system executes an immediate stop-and-wait protocol, always yielding right-of-way to personnel.
Deployment is rapid and minimally invasive. For a standard facility, the initial site scanning and data capture takes approximately half a day. Full 3D digital twin generation and route definition are typically completed within 48 hours. This is a one-time initialization process.
No. NetForge is designed for facility managers, not robotics engineers. The system is fully managed via our software interface. For hardware maintenance, we offer comprehensive support tiers that include repair handling and rapid unit replacement services to ensure your inspection continuity is never disrupted.